Take heed to this text
![A UR10e cobot arm trimming a thermoformed plastic part.](https://www.therobotreport.com/wp-content/uploads/2024/02/kal-plastics1.jpg)
The prolonged attain of the UR10e cobot, which is top-mounted on a gantry, means it will possibly trim two components per setup, reducing trimming time almost in half in comparison with earlier handbook trimming. | Credit score: Common Robots
Thermoforming, a know-how that’s greater than a century outdated, makes use of sheet plastic that’s heated to change into tender so it may be vacuum-formed in or round a mould. Extra plastic is then lower off to create closing merchandise with dimensions that vary from a number of inches to the scale of a room.
Through the years, 5-axis CNC routers changed hand-trimming for many thermoformers. Extra lately, Juliet Oehler Goff, president and CEO of Los Angeles-based Kal Plastics, had watched her friends discover the usage of giant industrial robots to finish-trim molded plastic components, however she wasn’t satisfied. For a enterprise like hers, the preliminary value level of business robots and their required security caging was too excessive, to not point out the programming prices.
“You find yourself having to have a skillset underneath your roof that’s very costly. That’s a threat for a small enterprise,” she stated. After speaking to colleagues, she heard behind the scenes that a lot of those that had tried industrial robots discovered that they didn’t work effectively for his or her functions and that they wouldn’t purchase them once more.
Analysis results in enterprise outcomes
Goff can also be a director and member of the R&D committee for the nationwide business affiliation, the Society of Plastics Engineers (SPE) Thermoforming Division. In that function, she had been concerned in quite a few discussions in regards to the state of robotics, notably collaborative robotics, and their software within the business.
When Kal Plastics wanted to exchange a CNC machine that was nearing the top of its life, Goff was introduced with a chance. She got down to analysis the usage of cobots for her personal enterprise and agreed to share her findings on the group’s nationwide convention.
As a contract producer, Kal Plastics produces a variety of components with various complexity and tolerances. Goff seemed for low-hanging fruit for the preliminary cobot deployment: components that introduced security or productiveness points with hand-trimming and may very well be produced on less-expensive tools to spice up competitiveness. As soon as she might show the cobot labored, she knew there have been different jobs that match these standards.
“I did my homework and located that Common Robots was the worldwide chief within the collaborative robotic area,” Goff stated. “They got here out and gave us an indication, and after I seemed on the numbers, they had been actually engaging. I used to be getting one other five-axis CNC router, and on the time it might have been a $250,000 funding and I might have waited 12 months to take supply. Once I met with UR, I used to be quoted two weeks to get the tools, and the entry level was 1 / 4 or a fifth of the fee.”
Throughout the course of her analysis, Goff employed Dan Sproles, a marketing consultant and one other director for SPE Thermoforming, to assist enhance general operations. Since his preliminary skepticism, Sproles has additionally change into a champion of light-weight, cost-effective, and easy-to-program UR cobots.
“For those who’re a thermoformer that’s been in enterprise for 50 years or 5 months, if I take a look at the cobot, it’s an ideal match—as a result of I can’t afford a brand new CNC, however I can afford this,” Sproles stated. “And I can afford somebody who’s going to mainly take a pill and program it. So your bang on your buck—it’s the robotic.”
“It will be silly for different processors to not contemplate including this to their operation,” Goff concurred. “They’d be actually lacking out on a sensible enterprise resolution.”
![A worker programming a UR10e cobot arm to trim thermoformed plastic parts](https://www.therobotreport.com/wp-content/uploads/2024/02/kal-plastics2.jpg)
Kal Plastics CEO Juliet Oehler Goff watches as robotic operator José Luis applications the UR10e cobot to trim thermoformed plastic components. | Credit score: Common Robots
Contained in the cobot cell
Previous to putting in the UR10e collaborative robotic, the forming and tough trimming came about within the thermoforming cell, after which the components needed to be transferred to the CNC router in one other a part of the plant. The Kal Plastics facility is housed in a number of older buildings, so shifting components was disruptive and added manufacturing time. It additionally introduced alternatives for injury or security hazards as components stacked up ready in queues.
The preliminary job recognized for the cobot is a posh trim of a four-cavity mould, through which one sheet of plastic is shaped into 4 components. The power to put in the cobot into the identical work cell alongside the thermoformer impressed Sproles to explain it as a “cell manufacturing dream.” Shaped components come off the thermoformer and are instantly rough-cut to separate them. They’re then delivered on to the cobot, which might trim two items in every setup. The cobot takes almost half the time of hand-trimming and gives better accuracy and consistency.
The deployment has two routers mounted on the robotic arm—one with an ordinary router bit and one with a bigger noticed blade. The benefit is that the routers are the identical business instruments used for hand trimming. They’re cheap and accessible off-the-shelf at any ironmongery store, so there isn’t a costly substitute or downtime on account of tooling points. Balancing the 2 heavy routers as they rotated across the half introduced early challenges that had been solved by mounting the robotic arm overhead on a gantry to cut back stress on the robotic joints and enhance accuracy.
The effectivity of the brand new work cell has already paid off. “The robotic has mainly taken over the entire overflow that we needed to do by hand,” Sproles defined. “Previously, we all the time needed to juggle backwards and forwards on the CNCs simply to make supply dates. We launched the cobot: now there’s no extra additional time and we are able to ship on time. I might say late shipments have dropped to lower than one %.”
Now that the cobot has been confirmed, Goff is wanting ahead to implementing newer, bigger cobots in different workstations, and for processes past trimming. Finally, she would like to “type, trim, palletize, out-the-door” from full, automated work cells. Till then, the pliability of the comparatively light-weight cobot is an added bonus. In contrast to a CNC, which requires a big devoted area, everlasting set up, and a three-phase, 480V energy supply, the gantry and UR10e cobot together with the fixture desk will be moved anyplace within the plant as wanted, so long as there’s a customary 110V energy outlet.
Decreasing prices and dangers
The cobot’s ease of programming was an enormous deal, stated Sproles. “If I purchased a daily CNC, common robotic, I’m going to spend 1000’s of {dollars} coaching that individual, not figuring out in the event that they’re going to be right here tomorrow.”
The expense and threat of coaching employees in conventional programming are important for small companies, that are already going through difficulties retaining expert employees in a aggressive labor setting. With the UR cobot, José Luis, a Kal Plastics operator, discovered the fundamentals of programming utilizing the free on-line UR Academy courses, which he might entry in his native Spanish. He then attended two periods of inexpensive, hands-on coaching. That was all it took for him to have the ability to create new applications, change instruments, and make changes as wanted.
Luis acknowledges that know-how is evolving and his previous expertise won’t essentially be the talents he wants sooner or later, so he’s longing for the chance to be taught. He stated, “My job is extra fascinating as a result of the manufacturing course of has actually improved, and the robotic gives me with a safer office.”
Goff is thrilled to have a technique to retain and advance her valued workers. “It will get your workforce excited as a result of it’s completely different, it’s cool, it’s distinctive,” she stated. “Whenever you get somebody who’s youthful, who’s hungry, you need to discover a technique to fulfill their starvation and maintain them and motivated.” She added, “It’s been a deal with to look at José develop on this function, and elevate himself.”
Luis is already scheduled for a grasp programmer class, the place Sproles expects he’ll acquire extra perception to make the robotic cell much more worthwhile and repeatable, and to program it for any new jobs the corporate brings in.
![A UR10e cobot arm trimming a thermoformed plastic part.](https://www.therobotreport.com/wp-content/uploads/2024/02/kal-plasatics3.jpg)
Kal Plastics balanced two business routers on the UR10e cobot arm, utilizing a noticed blade and an ordinary router. | Credit score: Common Robots
Necessity is the mom of invention
Goff described California as a tricky state for manufacturing. Challenges embody excessive prices of labor, occupancy, and vitality, in addition to a regulatory setting that presents extra workforce challenges.
“It’s a no-fault state for employees’ compensation accidents,” she defined. “It’s the suitable factor to supply a protected office setting, nevertheless it’s additionally a fiduciary duty to attempt to keep away from having these incidents happen. So we’re all the time searching for methods to work safer, work smarter, work sooner.”
Together with these challenges, Goff can also be coping with labor points which can be widespread throughout the nation: employees who’re much less interested by manufacturing jobs. Labor and security had been key drivers for Kal Plastics to change into an early automation adopter. “Necessity is the mom of invention,” Goff said.
The job the UR cobot now handles was once hand-trimmed. Sproles stated, “On this plant, there are two individuals that may route components. So should you introduced in a job that needed to be hand-routed, you’ve bought these two individuals and also you’re locked in as a result of that’s all they will do.” Now these workers will be redeployed to safer, extra useful duties, and manufacturing isn’t restricted to the provision of these employees, giving the corporate higher manufacturing flexibility.
When Goff started her analysis, her workforce was afraid robots had been going to exchange their jobs. She advised them, “Hear, you don’t get it, guys. I would like you to be protected. I would like you to work good. I don’t need you to only depend on your fingers; I would like you to depend on your information and expertise. If we are able to get our work setting to a degree the place you’re extra of a QC operator than a machine operator, that’s a win for everyone.”After working with the cobot, her employees’ attitudes have fully modified. Goff stated, “As soon as everybody settled down and so they noticed how this factor labored, it was like, ‘Why didn’t we do that sooner?’”